View Single Post
Old 04-22-2013, 04:43 PM   #5
Matt @ FSP

Matt @ FSP's Avatar
Drives: 2011 Camaro SS
Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,614
Originally Posted by iceman5730 View Post
Question I am changing the oil in the IPF Blower and can not seem to get then full 4 oz back in Left the drain open for 10 mins to ensure all the old oil had drained. Was only able to put about 3 oz back in. I had drained out about 2 oz Need help was wrong

Unless hot, I never get the full oil change out of any of the V3 blowers, doesn't matter what kit. If its hot, most of it should come out. You have a dipstick on that lower allen plug, make sure that the oil is in the hashmarks. If you overfill it by accident all you'll see if a bit come out of the vent plug on your next drive, and you can wipe that off real quick.

2013 ZL1 - 9.82 @ 138MPH (Stock Shortblock)
2011 Camaro SS - 9.87 @ 136MPH (Stock Shortblock)

Installation, Parts, Full Fabrication, EFI Tuning
Matt @ FSP is offline   Reply With Quote