View Single Post
Old 04-27-2013, 08:44 PM   #51
SSMickey's Avatar
Drives: 2010 IBM 2SS
Join Date: Feb 2010
Location: Columbia S.C.
Posts: 1,434
Originally Posted by jhiiidoc View Post
Is there an easier way to get to the JDP controller without pulling the entire front bumper off? To do this swap, I am dreading pulling the front bumper....
You can pull your header plate and get to the mounting screws of the control box with a right angle screwdriver. Once you do that, you should have enough slack in the harness to get to the plugs by crawling under the front bumper and reaching up. Hardest part about the whole thing is removing the header plate from around the hood latch.
Vengeance Stage II Cam, Halltech CAI, RX Catch Can, Full ARH Exhaust, QTP Cutouts, Powerbond 25% Underdrive, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
SSMickey is offline