Originally Posted by Orange LandShark
well I have simply disabled TC with one push and Stabilitrack, with the double click. I have never held the button for an "eight count" when shutting off the TC. I will try that.
It doesn't work
! I tried today and it didn't disable it. Of course you should try and see if your's reacts differently.
I reviewed some schematics today and found that the output from the yaw sensor is a single serial data stream. I was hoping for separate outputs for each axis so that the pitch could be isolated. Using the sensor output will require a method to analyze the serial data and modify it to remove the pitch signal. That is way above my pay grade! Anybody else have other (easier) ideas?
The communication schematic and connector information are attached.