View Single Post
Old 05-06-2013, 09:30 AM   #23
gajagfan

 
Drives: 2013 1SS 1LE Black - Std Exhaust
Join Date: Mar 2013
Location: Brunswick, GA
Posts: 1,449
Quote:
Originally Posted by SC2150 View Post
OEM it is all drawn right into the IM to be burned through the combustion chamber and then the cats to meet emmissions. Add ing a catchcan actually cools these vapors before ingestion so it would be just the opposite, but I really dont think there is any benefit from the cooling. The oil ingestion is the biggest issue you want to eliminate and a good can does that.

The Elite and RX work great with the 1LE clean side separator.

The RX can is available in most any finish you want....matte black, gloss black, polished, or any color match.

Thanks for the explanation. If you don;t mind, I have one more question. Why is it not recommended by GM to install the stock catch can if the vehicle is going to be street driven. It has been a while since I read the literature that comes with it (read it in the trunk of a showroom car when we ordered ours), but as I recall, they (GM) almost implies that the installation of the can on the street will cause more trouble than it fixes if the vehicle is going to be street driven. Thanks in advance for your help!
gajagfan is offline   Reply With Quote