View Single Post
Old 05-31-2013, 08:18 PM   #6
SSMickey
SECC
 
SSMickey's Avatar
 
Drives: 2010 IBM 2SS
Join Date: Feb 2010
Location: Columbia S.C.
Posts: 1,428
Quote:
Originally Posted by gm2376 View Post
i did it the way you do all gm cars with tpms....start the relearn, let out air in the front passenger until the horn beeps....problem no beep.....can't deflate my entire tire to see what happens.
That's not what you said in your OP... but anyway. Put the TPMS in relearn and start with the DRIVERS FRONT, let air out until the horn beeps once, then do the same with the passenger front, passenger rear, drivers rear in that order. After the relearn is done, you'll get a double beep. Turn the key off and air your tires back up to the correct pressure. If you start with any tire other than the LF, the relearn should work, but the system will report the wrong pressure per tire. If you have no way of adding air to your tires after the relearn, any tire shop should be able to do this in about 5 minutes.
__________________
Vengeance Stage II Cam, Halltech CAI, RX Catch Can, Full ARH Exhaust, QTP Cutouts, Powerbond 25% Underdrive, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
SSMickey is offline   Reply With Quote