Originally Posted by V6 LS Supercar
Well I participated in the 3rd annual Camaros for Heros event in Fayetteville NC. They had a mobile dyno so I strapped down to the rollers and heres the results. BTW the temp was 96 degrees. Sorry I don't have a scanner so I just took pics.
Type and make of dyno: DynoJet IDK the model
ODO at the time of the dyno: 11250 ish
Temperature: 96.33 F, 29.73 in-HG, Humidity 20%
Gear used(3rd or 4th): 3rd (LS so in 4th I hit the speed limiter)
Modification: C.A.I. w/scoop, VMAX PTB, NO tune
Correction used(STD or SAE): SAE I think
Result: 268 HP/ 232 TQ
Almost identical to mine with same mods at that point...Now u need to go in on the Nitrous group buy!
A 75 shot will boost your torque closer to 340.
2012: e85, 80mm TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, Elite catch can, HP Tune, Throttle Contoller, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, 1LE rear with 3.91 gears, BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, ported intake, Circle D 5c. 12.3@112 old setup
2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17