View Single Post
Old 06-17-2013, 08:20 PM   #54
christianchevell
old school chevy rodder
 
christianchevell's Avatar
 
Drives: 2013 2SS/RS Manual,DM exhaust,CRT
Join Date: Jul 2012
Location: Oregon
Posts: 1,540
Hey on a ss the front and rear calipers require different spacing of the rims...the offset to clear the calipers as the rears are larger.....Thus when i installed my new wheels the rear wheels are wider and have a larger amount of backspacing.....20mmm front vs 30mm rear to clear the brakes........
SO I know your a v-6 I hope you have no problem with say scratches to the calipers.....I doubt it as you have been driving it. Just a little known fact that hey the rims in the rear are wider and have a different backspacing for a reason....My fronts will not fit the rear without rubbing my calipers or maybe not even turning...........And hopefully its different on a v-6 as your calipers may be the same size..or have enough stock backspacing to clear.
__________________
2013 2SS/RS LS3 M6 ,CRT, NPP, Forged 428 ls3 stroker, GMPP ported heads, Katech chain, Mast windage, cam motion stage 3 cam, trunnion upgrade, Stainless power headers HFC, CAI induction, Vmax PTD, Fluidampr25% udp, LPW diff cover, BMR strut brace,trailing arms, toes, bushings, Rocket racing wheels, elite catch can, clutch reservoir, under dash/body lights/scanner LED, DRL lights/halos rewire, Custom striping and Sparks badges, mild to wild, tint, MRT louvers, ZL1 spoiler, MGW short throw, Monster dual modded c-7 clutch and bleeder with bearing support, high vol ported pump, Driven ls30 .
christianchevell is offline   Reply With Quote