View Single Post
Old 06-22-2013, 12:10 PM   #16
litle88
V8 Lounge member #2
 
litle88's Avatar
 
Drives: 2001 Ws6
Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,379
Quote:
Originally Posted by Pro Stock John View Post
Little any dynos of that cam in a stroker, the one you linked?
Yes sir I do, luckily I still have all my links from when I was doing my research and back and forth with Gabe over at comp cam's who is one helpful guy over there. BUT I got light in the loafers when it came down to pulling the trigger on the cam lol. SHOULD OF GONE BIGGER! I was happy for about 2 weeks lol.

http://ls1tech.com/forums/dynamomete...sults-vid.html

GMHTP also used this cam in a 3 part series on a 408
http://www.gmhightechperformance.com...t/viewall.html

From YB
http://www.yellowbullet.com/forum/sh...=337998&page=2


This setup is the best!!
http://www.pro-touring.com/showthrea...-boring/page43
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
litle88 is offline   Reply With Quote