Originally Posted by Nitroman28
On a Car with a TVS2300 at 10psi. how much Fuel pressure would I have to be running at WOT to run a 100 shot or less? 40psi/50psi/etc..
Short answer is it doesn't matter. If using a wet kit you can be at 40psi or 58psi as long as you have the correct fuel jet to get the a/f where you want it it doesn't mater.
On a 100 shot with 55psi I think it calls for a 33 jet on the fuel side but if running at 40psi you would go bigger say 40 jet instead. The recommended jets are usually pretty rich so you need to test and adjust till you get it where you want it.
I am running a 250 shot using 88N 33F jets and still in the low 11 a/f even though the chart recommends 88N 51F.