Quote:
Originally Posted by Stealth 2010 2SS/RS
ok so I finally get my wideband bung welded in and just trying to make sure everything is working. I have an aem inline wideband uego controller, all other pids log just fine but the wide band just sits at 7.3 volts this can't be right and I'm almost positive I have it wired up right, white wire from wideband to yellow/orange. I have all the up to date act drivers firmware, and using live links gen 2. I've put the equation in live links as (2.375*v)+7.3125. Any help or ideas would be greatly appreciated. Just trying to get everything set up to log for Ted.
|
what firewire are you using. They can come in 2 different configurations. I metered mine out to figure which one I had. I'd suggest adding analog 2 to your pid list just in case yours is wired opposite. Mine will default to a voltage reading if I log without hooking it up. This seems like your problem