View Single Post
Old 09-23-2013, 08:23 PM   #293
Chris-10
Tri-County Camaro Tampa
 
Chris-10's Avatar
 
Drives: 2ss/rs vr 6m
Join Date: Mar 2009
Location: New Port Richey,fl
Posts: 2,654
Well I finally got the door panels done. I bought the Krud Kutter graffiti remover and some 0000 steel wool. Striped them down and buffed them up to clear. When I painted them I taped off where the light tube goes, came out great except when I put them back together the light didn't shine thru.

So I take tem back apart and decide it needs to be sanded down to the other edge, I tried sanded them down with a tape line but it wasn't going right so striped them all the way down to clear again and start over.

When I got done painting the 2nd time it left a clear line along the top edge. I didn't really want to see that edge so I tried airbrushing a light coat of paint over the clear part. That made the light to dim so I sanded that back down.

What a PITA but it's done out and came out real nice.

Name:  image.jpg
Views: 162
Size:  159.1 KB
__________________
My build thread.click the pic. COTW 10/24/11

Last edited by Chris-10; 09-23-2013 at 09:42 PM.
Chris-10 is offline   Reply With Quote