Quote:
Originally Posted by AmericanMuscleCars
Hey guys I was at a car show and I had my engine bay open looking under the hood, everything else was fine except for the little crease by the quarter panels when the hood is open, it has these hard water spots that are probably baked on because of the heat from the engine. Will scratch X or a rubbing compound take it out? Thanks, its something different that doesn't really come up here so yeah, any help would be appreciated.
|
This is how I have always done it. I soap the engine really well with a sponge in ever area I can. Rinse it off real good and then out comes the leaf blower. This normally gets rid of just about every drop of water. I then go back with some quick detailer and a micro fiber to hit anything the blower missed. As for water spots... I normally just put a little elbow grease into it and they come out.