Pfadt Coilover Troubleshooting
Originally Posted by bannonm
Can't help you with the noise, but the threaded shaft will spin. If you notice the top of the shaft can fit a hex wrench. That's how you hold it still from spinning. A normal torque wrench won't work with a hex wrench in place. I highly warn against turning the shaft with a torque wrench and holding the nut still. If you're not careful the shaft can crack on the threaded part.
You do know that nut gets torqued to only 65ft lbs.
Yes I understand that it only gets torque to 65lbs. That is why I stated in my post that I snugged it an additional 5 lbs to 70 lbs to see if it would help. So I take it you have to use a crows foot to torque it then?
2012 2SS/RS, Magna TVS2300, RX Catch Can, Borla S-Type, Pfadt Stage 4 w/ ZL Spec Sway Bars, ADM Custom Boost/AFR Gauges, Hurst Short Throw, Forgestar F14 Matte Black 20x11 & 20x9.5 Deep Concave all 4, Nitto Invo 315/35 & 275/40, Heritage Grill, Sparks Black Grill SS & Trunk SS, P13W Fog Lights (cool white) w/ DRL Harness, Blacked Out Brake light bezels, Xpel Smoke Light Kit