View Single Post
Old 05-14-2014, 01:35 PM   #16
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,366
Quote:
Originally Posted by NotYetLegend View Post
Alright, will check if I have 10mm or 12mm as soon as possible. Should be able to check when I get home this afternoon no problem (as long as it stops pouring...). My guess is that if early 2012's have 10mm mine will have 10mm, there are other things on my car that seem to indicate some 2011-ness like the existing threaded holes for the OEM strut tower brace and the fact that my fog lights have the old style bulbs (according to CamaroDIY). Just a hunch however. Thanks again for all the help and it's a relief to hear that I don't need the sway bar reinforcement brackets, not that they are expensive or tricky to install, it's just nice to know they are not at-risk.
The strut bar thread holes are present on mid 2011 and later, but if you have the older style P13w DRL bulbs, I'd bet you have 10mm endlink studs.

Quote:
Originally Posted by BMR Sales View Post
Thanks for the confirmation that the bar will fit either way. I suppose whichever direction you would prefer will work.
No problem!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | JDP Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote