Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 09-05-2015, 12:25 PM

Well, I let the gauge sit overnight with electrical tape and -- that is a no-go. I went and bought friction tape (for the old schoolers - tape we used on our wooden bats for grip). hockey stick tape will work also, (About 3 to 4 wraps -- the pod is not 'perfect' circumference:

After that, I plugged in the connectors, followed the directions for choosing the items to display and tested!

Buttoned up and ready to go!

Now, I'll set the upper and lower parameters I want to monitor!

http://aeroforcetech.com/manuals.html

Here is the manual (3.8 is this version). It starts up showing CTSV -- wonder if they have camaro?

4 screens per gauge (2 entries per screen) so 8 screens with 16 entries (top/bottom) -- lots to review...

-Don

09-05-2015, 12:25 PM	#480
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Well, I let the gauge sit overnight with electrical tape and -- that is a no-go. I went and bought friction tape (for the old schoolers - tape we used on our wooden bats for grip). hockey stick tape will work also, (About 3 to 4 wraps -- the pod is not 'perfect' circumference: After that, I plugged in the connectors, followed the directions for choosing the items to display and tested! Buttoned up and ready to go! Now, I'll set the upper and lower parameters I want to monitor! http://aeroforcetech.com/manuals.html Here is the manual (3.8 is this version). It starts up showing CTSV -- wonder if they have camaro? 4 screens per gauge (2 entries per screen) so 8 screens with 16 entries (top/bottom) -- lots to review... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 09-05-2015 at 08:50 PM.