Quote:
Originally Posted by LS3SSRS
ASTEDA, i have an adjustable output adapter as well, but mine is adjustable on each channel. in other words, left and right speakers have adjustable gain screws for the RCA outs. was yours the same? and if so, how did u accurately set the gain the same for each? just to what sounds good?
|
Yes, my adapter was the same. I adjusted mine to about half... that way I keep the amp at the lower settings. With my amp (850 wt/mono) and enclousures (thin) I could have done about a 1/4 turn less to have been spot on. Currently, I have to play it pretty loud to get the mids and highs to come out clear. I'll change it up when I'm done making my custom boxes.
In the end it'll depend on your amp and subs. Just play with it before you tuck it away. If your adapter is like mine you'll have to turn the up the gains for the amp to work. The first time I tested the system I didn't adjust the gains and the subs were almost silent.