View Single Post
Old 09-22-2009, 07:46 PM   #3
shawn18's Avatar
Drives: 1969 CaRaMo
Join Date: May 2009
Location: North Carolina
Posts: 3,046
the steps are in order of the pics starting with the top left
1. Disconnect the negative battery cable
2.Disconnect th Mass Air flow sensor
3.Disconnect the factory air box 2 10mm nuts on the top
4.Remove the Mass Air flow electronics from the old air box
5.Install the sensor electrincs into the new intake
6.Remove the breather tube from the valve cover and install the new one
7.Install the new intake starting with the throttle body side and connect breather tube then the filter end and reconnect the battery and start the car and let it idle for a bit for the computer to adjust make sure all tools are out from under the hood"LOL" and you are done hope this helps the novice mechanic like myself
2015 #595 A/C
shawn18 is offline   Reply With Quote