View Single Post
Old 07-29-2009, 10:54 PM   #2
Macamaro
 
Drives: Camaro 2SS
Join Date: Aug 2009
Location: Bryant, AR
Posts: 3
Here is how I installed my Valentine 1 with some closer pics.

I used a Fuse Tap from Radioshack but had to trim and shape it a little to fit easier into the fuse slot. This thin piece of metal is easily shaped and clipped to fit. It looks like this:



The end of the fuse tap easily connects to a wire via a quick connect terminal shown here:



I started by connecting the ground wire to the frame and putting the velcro strip for the V1 connector on. Ground wire location and velcro location shown here:



This is what the V1 power outlet looks like (Red wire for + black for -. I've also got it connected here):



Once the shaping of the fuse tap was done and the ground wire connected, I put the fuse in the fuse tap and then put them both in the F17 slot which if you read previously controls the console. Shown here:



A couple of minutes later (zip ties and clean up) I came out looking like this:




This method tucks the wire neatly under the head liner and runs the cord down to the fuse box. And thats it! Now my detector only comes on with the key.
Macamaro is offline   Reply With Quote