so, yesterday i'm complaining about how long this is taking me...
today i decided to do something about it. i work quite a bit, and normally feel too tired to bust out some more work when getting home. tonight i got home at 6, and while not much can be done in 1 hour, it's one less thing that i need to do later
i masked up a few areas that i was going to be glassing and didn't want to get messy, and took to it ...
i laid down 1-2 layers of chop on the top and around the back side of the top of the enclosure... the parts that's harder to get inside the enclosure, and then laid up about 2-3 layers of woven mat on top of the chop to finish it out. the rest of the enclosure can be strengthened from the inside, so that's what i will do next.
left and right sides .... so purrty...
no holes, no gaps, and i'll make a sludge mix when all is done and slather the inside for final strength.
last night i also finished wrapping the 2nd AS 200.4, and need to order some more carbon wrap for the A Class and the remaining pieces of the install that I'll be trimming out.