Quote:
Originally Posted by Phat Ralph
Guys,
Working on my track setup a little more. Now want to play with Coil Spring Preload on the Pedders Xa's. Right now sitting at 5mm preload on all four corners. Talking to some guys that road race cars say to run 8mm in the front and 3mm or less in the rear. This will aid in nose dive under hard braking and provide good weight transfer for the drive off the corner.
Anyone have any information that they would like to share. I know that this is a lot driver preference. What may be the optimum for our Camaro's?
Later
Ralph
|
Ralph,
If you setup like the other guys how are you going to beat them
With Pedders Xa or Supercar coilovers there is only one way to set the pre-load. My way
Front coil preload 2/3mm
Rear coil preload 10mm
I'll be happy to discuss your setup details here on the forum or privately if you are looking for an extra edge
Here is the information I need from you.
- Wheel and tire package details
- Detailed list of powertrain modifications
- Detailed list of all suspension modifications
- Current Alignment specifications
- Corner weights
- Ride Heights Pedders Style
- Sway bar sizes and setting if adjustable
- RWHP
- Brake Package including fluid and pad details
With this basic information we can into a detailed setup discussion.