I have the same issue. When I installed the Morimotos i could not get the angle up high enough (D#mn near pitch dark with normal beams on because the beam is only a few feet out from the car)...I tried adjusting and adjusting but still crappy. So I drive with my high beams on, It does not blind drivers and looks perfect. However I am going to re-open the casing and adjust the lights from within the housing by using washers behind the reflector...and before I reseal them I will test them this time mounted and screwed down. If you dont screw them down when you test them you will be off by a whole lot.
|