Quote:
Originally Posted by olblue75
how hard are these things to install
|
The inserts are really very simple. You basically just lower the exhaust, remove the 4 main cradle bolts and lower the cradle about 3 inches. The inserts install into the voids of the OE rubber bushings, making the bushings essentially solid poly/rubber. There is a little more to it but you can view a more detailed set of instructions
HERE if you are interested in the procedure.
The differential bushings are not near as easy, mostly due to the press fit of the bushing into the differential. For this install you must lower the differential and hole saw the OE bushing out, then pry the bushing shell out of the differential. Again, if you are interested in more details, check
HERE for complete installation instructions.
We also have lots of other bushings available for your 2010 Camaro. To check them out, visit our website at:
http://www.bmrfabrication.com/F5.htm