|
Not an owner, but I am doing my homework for a possible future purchase.
I have been reading about the issues with the ZL1 and in doing so noticed the thread by CamZL1 on the major problems with oil leaking. In that thread the mechanic at the dealership mentioned that the wiring for the power steering was very close to a razor sharp support bracket. It seems to be the factory routing of the harness and I am wondering if anyone had noted that this might be an issue with the failure rate being so high. The mechanic noted that if the harness was left in that position it would eventually chafe through and cause a failure.
In an unrelated ussue I had with my 2010 Equinox, I had a service air bag light come on. The problem was a bulletin on the connectors for the seat harness. They were causing the problem. The new "upgraded" connectors have solved the problem. Could this be a connector issue? The turn it off and wait rememdy had worked until it would not reset itself. Four times at the dealer before they fixed it.
|