The Pedders ZL-1 swaybar will clear the Pedders Supercar reservoirs. I bolted my rear ZL-1 swaybar in place yesterday. Only thing I had to do to clear is re-position the reservoir and slightly turn the reaservoir mounting bracket so there was enough clearance for all the parts.
Addition: I forgot to mention that I am making my own endlinks. I need the endlink to clear my 18" race tires, and the poly bushing/bolt below the Lower control arm will not clear. I am modifying my LCA's using a rod end and the EP098 kit to build the endlinks.
I am doing most of the fabricating this weekend and will have pictures afterwards.
Last edited by 600hp-lpe; 04-17-2012 at 07:20 AM.
|