Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Alternative way to install dashboard ABL (with light tape)

FIREWOLFF · 10-14-2009, 04:50 PM

I was talking to few guys at their last meet and we were discussing the ABL dash upgrade done. The biggest thing that scared them off was cutting the dash. I explained that it can be done without any dash trimming. Since I had no way of showing them without doing it myself I got right on it and here are the results. First and foremost once I sanded the top edge of the molding. The entire install only took 45 minutes. I followed the other guys instructions to the t. But with my changes. Instead of the led and light tube. I used light tape and a transformer.

10-14-2009, 04:50 PM	#1
FIREWOLFF Drives: 2010 Camaro 2LT Rally Yellow Join Date: Aug 2009 Location: Victoria, Tx Posts: 244	Alternative way to install dashboard ABL (with light tape) I was talking to few guys at their last meet and we were discussing the ABL dash upgrade done. The biggest thing that scared them off was cutting the dash. I explained that it can be done without any dash trimming. Since I had no way of showing them without doing it myself I got right on it and here are the results. First and foremost once I sanded the top edge of the molding. The entire install only took 45 minutes. I followed the other guys instructions to the t. But with my changes. Instead of the led and light tube. I used light tape and a transformer. Attached Images __________________ Its Just A State Of Play!!