|
I just assumed that the bulbs would cover the entire plate, just like the OEM bulb does. The brightness is fine with what I got in the Stage1 but the it does not displace light over the entire plate. So what kind of adjustments can be made. The housing can not be modified nor should it be. That leaves the bulb. I asked it the pins could be bent in opposite direction so the contact is different of reversed and that was not well received so I don't know what else could be done except get new bulbs.
Kinda like buying wax but it won't put a shine on your car. The modification, take the car to the body shop, have it stripped down to bear metal, primed, painted and cleared and start using the wax. I don't think it works like that. Just saying......
__________________
Never grow up, it's a trap!
|