Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Xlr8torZ28 · 02-26-2009, 02:12 PM

Just keep in mind that if you have your wheels widened, they add the extra width to the inside of the rim (towards the wheel well)... I've known people who had an extra inch added, then used a 1/4" spacer to put the wheel a little more to the outside. My guess is that there will be about 2 or 3" to play with between the wheel and fender well, maybe 4".

By the way... if I remember correctly, they do not widen cast aluminum.

02-26-2009, 02:12 PM	#12
Xlr8torZ28 aka: The Evil Joker Drives: 1991 Z28 (murdered out) Join Date: Feb 2009 Location: DFW Posts: 32	Just keep in mind that if you have your wheels widened, they add the extra width to the inside of the rim (towards the wheel well)... I've known people who had an extra inch added, then used a 1/4" spacer to put the wheel a little more to the outside. My guess is that there will be about 2 or 3" to play with between the wheel and fender well, maybe 4". By the way... if I remember correctly, they do not widen cast aluminum. __________________ 1991 Z28 305H.O. TPI T56 six speed w/ B&M ripper shifter, ROH Drift-Rs 18x9 w/265/35-18s & 18x10 w/295/35-18s, 4.10s, K&Ns, Holley 52mm, ADS Superchip, Hedman headers & Y-pipe, custom Flowmaster, MSD, SLP posi unit, Koni yellows, Eibach Pros, Lakewood boxed rear control arms, TDS wonderbar, Hotchkis dbl adj panhard bar