View Single Post
Old 03-17-2010, 11:18 AM   #22
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,192
Quote:
Originally Posted by JusticePete View Post
There are SUPPOSED to be two piece (aluminum hat bolted to an iron rotor) rotors. They were sold as the J63 option for the CTS-V in 2009. The option was discontinued for 2010. The calipers were red, but the same as the silver in function as were the pads. Only the front rotor was different. They are NOT a GM part. They are supposed to be available from Brembo and are not. After much research into the mystery of the missing two piece rotors (thank you Witt Buick Pedders and my secret sources) I can tell you they are not currently available, BUT will be down the road.

Cadillac recommends the rotors be changed with the pads (there is a surprise for performance brakes LOL) so my guess is that some time later this year or early next year we will all be updating pads and rotors based on wear and the availability of the two piece rotors.

As for slots and holes -- I am not a big fan. Modern pads do not gas like the older pads making the slots and holes of minimal value. Granted some high end designs like the carbon ceramic ZR1 have holes. I run no holes and no slots for maximum clamping heat tolerance. Crude brake ducts are critical on our cars as there is little air flow to cool the brakes. This is just my opinion and not absolute certain fact as would be my opinion on anything suspension related
AAAHHHHH!!! Thanks for the info'
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote