View Single Post
Old 06-30-2010, 12:24 PM   #2
Ryne @ CMS
 
Ryne @ CMS's Avatar
 
Drives: 16 Camaro SS, 06 C6 Z06, 15 Sierra
Join Date: Nov 2009
Location: Murrieta, CA
Posts: 778
Quote:
Originally Posted by Adam@ST View Post
We ran our Kenne Bell powered Camaro Monday at Cal Speedway. We ran several 10.5x passes wiith a best of 10.54 @ 133.99 with a 1.53 60' .
This was on 15.8 lbs on 94 octane . We will be turning the car up to 24lbs and running c-16 next week. Looking to run a 9.7x assuming the axles hang in there.
Super Chevy Magazine was present ,and Jim Capisano also ran the car. We drove the car to the track, changed the tires, made some passes ,changed tires back and drove home. The car was full weight as well. For those who havent seen the car or been in it, our Camaro has perfect street manners. You would think it was stock, til you hear the whine from the Kenne Bell.

The combo:
Kenne Bell 3.6H LC running 15.8 psi
forged 6.2l with stock LS3 cam and lifters
stock exhaust manifolds and cats with an ARH cat back
A6 auto trans with a PI 2200 stall convertor
stock 3.27 gears and stock suspension
stock fuel pump with Kenne Bell boosta pump


Soon to come..BOOST,cam,and Long tubes with cat delete. Then we will be looking for some low 9's with a fully streetable car.
great times.... i would love to see a timeslip
Ryne @ CMS is offline   Reply With Quote