06-30-2010, 03:59 PM
|
#8
|
Drives: 2010 SIM 2SS/RS MONSTER
Join Date: Aug 2009
Location: LOS ANGELES
Posts: 1,506
|
Quote:
Originally Posted by Adam@ST
We ran our Kenne Bell powered Camaro Monday at Cal Speedway. We ran several 10.5x passes wiith a best of 10.54 @ 133.99 with a 1.53 60' .
This was on 15.8 lbs on 94 octane . We will be turning the car up to 24lbs and running c-16 next week. Looking to run a 9.7x assuming the axles hang in there.
Super Chevy Magazine was present ,and Jim Capisano also ran the car. We drove the car to the track, changed the tires, made some passes ,changed tires back and drove home. The car was full weight as well. For those who havent seen the car or been in it, our Camaro has perfect street manners. You would think it was stock, til you hear the whine from the Kenne Bell.
The combo:
Kenne Bell 3.6H LC running 15.8 psi
forged 6.2l with stock LS3 cam and lifters
stock exhaust manifolds and cats with an ARH cat back
A6 auto trans with a PI 2200 stall convertor
stock 3.27 gears and stock suspension
stock fuel pump with Kenne Bell boosta pump
Soon to come..BOOST,cam,and Long tubes with cat delete. Then we will be looking for some low 9's with a fully streetable car.
|
I THOUGHT OUR STOCK GEARS WERE 345'S ? 
__________________
HP MONSTER' SOUTHERN CALIFORNIA BUILT, LMR CAI, CUSTOM GRIND CAM, CUSTOM BUILT CNC PORTED AND POLISHED HEADS, FAST 102MM INTAKE MANIFOLD,ARH LONG TUBES AND HIGH FLOW CATS, BIGGER INJECTORS, VALVES SPRINGS RETAINERS, MGW SHORT SHIFTER, EIBACH SPRINGS, FACTORY CHROMED WHEELS, BLACKED OUT EMBLEMS, BLACKED OUT ROOF,BLACKED OUT MARKERS, 3.5 INCH ELECTRONIC CUTOUTS, FLOWMASTERS, ZEX WET 150 SHOT, FOR A GRAND TOTAL OF =630 REAR WHEEL TORQUE ,AND 600 REAR WHEEL HORSEPOWER 
MY JOURNALhttp://www.camaro5.com/forums/showth...02#post2023802 SOON TWIN TURBO SETUP 
|
|
|