Quote:
Originally Posted by SGOS252382
Yes, the instruction will tell you exactly where to cut.
You have to cut the stock exhaust just over 1'' from the muffler weld. Then you carefully pull the stock mufflers and tips out (thats the hardest part because of the rubber hangers). Then you put the new mufflers and tips on. The kit will come with clamps that connect the new axle back with the stock exhaust.
I paid $40.00 to have a local transmission/exhaust shop install my GMPP axle back - which installs the same way. They took their time and did a very careful job not to scratch the tips or car. It took them about 35 minutes.
|
i rolled my car up on jack stands and cut them myself.....took me about 30 minutes.. the most important thing is get a new metal blade for the sawzall...I started with a blade and could not cut it, ended up going to ace hardware and picking up new blades, then it cut it like butter...