Quote:
Originally Posted by MightymouseSS
Getting NF cammed soon. I was wondering if these bmr trailing arms will help it hook up. I know everyone always goes crazy with power but its nothing if you can't get it to the ground.
|
The trailing arms will definitely help with the unwanted movement in the rear suspension which will combat the wheel hop and help you get the power down to the ground. If you are going to do a set of the trailing arms make sure you do the outer trailing arm bushings (BK006) at the same time because they will also help out considerably.
Quote:
Originally Posted by MagnumForceGB
Yes, along with subframe bushings. I'm not putting the same power down but my can never hops.
|
Rear subframe/rear cradle bushings are never a bad idea and one of the first suspension mods we recommend for the late model Camaros. They would definitely be a good option for the OP too.
Quote:
Originally Posted by blazzin1
The short answer....YES! Longer answer....Trailing arms are known to help reduce and/or help eliminate wheel hop. If you get rid of the wheel hop, you will definitely "hook up" better off the line. And you're absolutely correct, all the HP in the world doesn't do you a darn bit of good if you can't apply it!!! So....any suspension mods are money well spent in my book!!! I would recommend the TCA027 or TCA033 with the spherical bearings. And definitely upgrade the outer T/A Bushing while you're at it....BK006. Call Kyle at BMR....he'll hook you up!!!
|
I couldn't have said it any better myself!
