Quote:
Originally Posted by 1969to2010
my trailing arm bushings were replaced already because of the last issue I had
|
If you didn't replace the bushings in the trailing arms themselves I would at least take the time to check them out. It doesn't take too much time to verify if the poly-urethane bushings are good or not in the trailing arms and toe rods.
Quote:
Originally Posted by ssmike
That sucks man! Is there any evidence of the cradle moving around? I had a similar issue but more when I accelerated the tail end would wag. I replaced my BMR cradle inserts with Pedders full bushings and problem solved!
|
The cradle inserts only do so much to control that movement back there since they work in conjunction with the factory rear cradle bushings. Going with full poly-urethane replacement rear cradle bushings is always a better option and will control the rear cradle substantially better.