Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Can you use Pedder Camber Plates with any strut/coilover?

Synner · 03-15-2014, 04:36 PM

Don't have enough hands to do both so I will add pics and a better description, you'll just have to trust me.

Spring perch top. The pressed in piece in the bearing, OD .707", ID .561"

The spring perch slips into the upper portion to be positively located/centered.

Spring perch bottom. This is the one I can't get perfect without pressing things out so I just looked up the specs here, Koyo bearing 6204Z. ID 20mm, OD 47mm, 14mm thick
http://www.xbearings.com/p/koyo-6204z-p45253.html

Upper portion top. .702"

Upper portion bottom, same measurement as above.

03-15-2014, 04:36 PM	#10
Synner Drives: cars Join Date: May 2011 Location: Oversneeze Posts: 4,544	Don't have enough hands to do both so I will add pics and a better description, you'll just have to trust me. Spring perch top. The pressed in piece in the bearing, OD .707", ID .561" The spring perch slips into the upper portion to be positively located/centered. Spring perch bottom. This is the one I can't get perfect without pressing things out so I just looked up the specs here, Koyo bearing 6204Z. ID 20mm, OD 47mm, 14mm thick http://www.xbearings.com/p/koyo-6204z-p45253.html Upper portion top. .702" Upper portion bottom, same measurement as above.