View Single Post
Old 07-08-2012, 05:58 PM   #35
HufferSS
I Wanna Go Faster!!
 
HufferSS's Avatar
 
Drives: 2011 2SS Synergy Green M6
Join Date: Apr 2011
Location: SC
Posts: 3,323
Quote:
Originally Posted by EncoreCamaros View Post
Sorry yes it is a stick car, my cam isnt in yet but running my whipple it put down just about 570 to the wheels. Im thinking with the blower cam and a smaller 3.750" pulley hopefully looking at 650 rwhp. Correct me if im wrong
With a blower CAM and 3.75 inch pulley my Whipple put out about 10psi. It was in the 630 to 640 rwhp range on pump gas and 730ish on race gas. Stock bottom end so both tunes were on the conservative side on the timing.

My car went 10.5 at 135.

The next really important question you need to ask yourself is what are you going to do about the rear end and the clutch?
__________________
Built by Vengeance Racing
9.31@154.81 mph
Procharger F1-X
RPM Level 7 4L80e + Coan Converter
Hendrix 9" Rear Axle + 3.50 Gear
ARH 2" LTs+3.5" Exhaust
Fore Fuel System, Bogarts + Hoosier Slicks
Pfadt Drag Pack Suspension
My Build Thread | Best Pass To Date
HufferSS is offline   Reply With Quote