Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - How do you remove interior rubber dust boot?

LS3 Handler · 06-22-2013, 08:15 PM

-Hey these are some pics of the parts off the car minus the shifter itself (pic 1)
- You should see this from the top (pic2) take out the four bolts in each corner this is the plate the boot is attached to
-You have to go under the car and you will see the shifter housing (upper piece in pic 1) and you will see the forks mounted in a bracket toward the rear of the car ( upper piece right side pic 1). Take off the nuts that attach the mount for the forks and slide the mount off. The studs for the nuts are attached to the bottom of the boot bracket. (pic 3).
- Now you should be able to go back in the car and move the boot with its attached plate out of the way.

If im not mistaken that is how you do it but its been a while sence I replaced mine with the MGW shifter. I hope this helps.

06-22-2013, 08:15 PM	#2
LS3 Handler I love the LS3 Drives: 2010 IOM 2SS Manual Join Date: Dec 2012 Location: Washington NC Posts: 361	-Hey these are some pics of the parts off the car minus the shifter itself (pic 1) - You should see this from the top (pic2) take out the four bolts in each corner this is the plate the boot is attached to -You have to go under the car and you will see the shifter housing (upper piece in pic 1) and you will see the forks mounted in a bracket toward the rear of the car ( upper piece right side pic 1). Take off the nuts that attach the mount for the forks and slide the mount off. The studs for the nuts are attached to the bottom of the boot bracket. (pic 3). - Now you should be able to go back in the car and move the boot with its attached plate out of the way. If im not mistaken that is how you do it but its been a while sence I replaced mine with the MGW shifter. I hope this helps. Attached Images Last edited by LS3 Handler; 06-22-2013 at 08:29 PM.