Quote:
Originally Posted by mlee
Nailed it right on the head... PQ read this over 3 more times please...
I think what I meant, didn't come across in what I wrote. You can't have a decent size cam without a TC, but you can install a TC separate from the cam, so do it as the first step and get that part out of the way
|
Fair enough. But what if I want the cam before the stall?
Is there a decision in that it's self? Or just a mild cam either way. I'd rather do the stall later. But I don't want to do anything stupid.
Quote:
Originally Posted by jsharp
Mine is in this week for a TC and blower cam via LS3 conversion. VVT will not allow you all of the options a conversion would with cam selection as of now; in the future I am sure more and more will become available. The weak point that most will sway you to a conversion with is the lifters. If you want to be cost effective go VVT and if you want a full selection of options and stronger lifters go LS3 conversion. As is always true you get what you pay for. Also do know there is a VVT cam with and without afm so you can still get a VVT cam and retain AFM through some cams from Texasspeed but there is more power to be had without AFM. Also you will limit yourself even further without a stall as you will have cam surge with larger cams that gain 30rwhp or more and that is a bad feeling so you may want to stay with a smaller cam or get ready real quick to get a TC.
|
I'm leaning conversion but I'd sure like to get the same power, reliability, and total benefit from a VVT since it would be easier.