Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Installed SLP Skip Shift today and its harder to engage certain gears WHY?

IROCanSS · 11-07-2009, 10:01 PM

ok, did you connect the right connector? I did this mod today and my car works flawless. There are two connectors that look the same and will accept the jumper. One is obvious and easy to get to right to the rear of the tranny plugged in by the shif linkage. THIS IS NOT IT! This is the reverse selonoid sensor!

The plug for the skip shift is tucked WAY up on top of the tranny. You can barely see it, let alone get to it. I installed mine today while I had the tranny lowered putting in the hurst shifter. Better make sure you connected it to the right plug!

11-07-2009, 10:01 PM	#3
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	ok, did you connect the right connector? I did this mod today and my car works flawless. There are two connectors that look the same and will accept the jumper. One is obvious and easy to get to right to the rear of the tranny plugged in by the shif linkage. THIS IS NOT IT! This is the reverse selonoid sensor! The plug for the skip shift is tucked WAY up on top of the tranny. You can barely see it, let alone get to it. I installed mine today while I had the tranny lowered putting in the hurst shifter. Better make sure you connected it to the right plug!