|
Well got bored so i decided to Plasti Dip the side marker lamps. I removed the front and back. I have 1/8 inch pinstripe tape laying around so i used that to create the line. I put the tape over where the reflector part starts on the top of the light. After i lit them back up i realized the edgeing around the light was not painted and the light showed through the small gap between the light and the body. So i took them back out and repainted the edges. BTW you will need about 8 coats to keep the light from shining through the paint. Its not led good but not bad. It definitely takes the eye away from the lights and makes them less of an eyesore.
|