I used
http://www.expresspaint.com/
The way I painted it:
1) clean all to be painted surfaces
2) use expresspaint.com
Prep-All spray
3) sand down to be painted surfaces
4) light coat prime all to be painted surfaces with
Primer
5) wait 10 minutes then second coat of primer
6) wait 15 minutes then light coat of paint, and you wanted
Red Jewel paint
7) wait 10 minutes then second coat of paint.
8) wait an hour
As long as everything is the way you want it, then
9) light coat of
Clear Coat
10) wait 10 minutes then second coat of clear
11) wait 24 hours to fully cure
Results for me using Imperial Blue Metallic and Summit White:
same paint on fuse box:
