Quote:
Originally Posted by Stephen12ZL1
the directions say "Install ADD A CIRCUIT fuse holder in flapper fuse location AFTER REMOVING FLAPPER FUSE .Install flapper fuse back in the ADD A FUSE CIRCUITS open slot.See pic" OK...so I looked at the harness and saw there was a 10amp fuse already in the harness so I removed the fuse from the fuse box and did not place the other fuse in the harness. Upon inspection, the open slot is below the provided 10amp fuse so make sure two 10amp fuses are present for proper operation. The harness is GM quality and fits perfectly!
|
Sooo.. you read the instructions
after the installation? My brutha.