Quote:
Originally Posted by sting808
The SCT device uses a firewire connector/cable on the unit for ease of connection, but all it does is connects the device to the wideband with pigtails on the other end. The signal is a standard analog DC output into the SCT. You can get a 6-conductor firewire(1394) cable and cut the connector off one end and use that. I would only suggest this if you are comfortable with identifying the proper pinout for the signal.
|
Yes I have one.  Although doubtful, I was concerned that Justacamaro may want to connect the signal from the metering device directly to the computer. Although the cable would have to be a 4 pin USB type A and not the firewire 400 cable which is a 6 connector. When things don't work and I get desperate, I'll try anything.
__________________
GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock
|