|
I have them installed on my 2014 1LE. They fit without much issue but you will have to drill out a rivet along the bottom of the fender to remove an L shaped plastic bracket since the splash guard has this part integral to it. It fits between the fender and the inner wheel house quite nicely but I would recommend dismounting your tire before doing it. I did it with the tire on and there wasn't a lot of room to maneuver a wrench or ratchet. The screws also use torx bit which I already had from the RPI Designs front splash guard kit that fit without issue on the 2014. The part #’s are 22829497 for the left and 22829496 for the right, they are $57.18 each.
|