I didn't find any posts on ours, I used a bit of floss to cut through the foam tape that held it on, them saturated it with wd40 to get it to come off. then washed the spot with soap/water to get off the residue. I can help you out, you're close by. if you just want to wire it into your parking lamps, that's easy enough, it'll just be a lit emblem. if you want to have it dual intensity with your brake lamps, you'll need to get them from AAC or find the circuit diagram online and recreate it from radio shack parts on the cheap. I can help you out there. your military, usaf even, I'll help you out, always willing to help out a fellow airman
