Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

multiSS · 10-16-2009, 04:49 AM

Since I purchased my 2SS-RS LS3 6S I have noticed some clicking sounds coming from rear axle area on acceleration and decceleration. Local gm dealer found that the axle hub to axle spline nut was loose. This was allowing the hub to turn slightly on the spline causing clicking noises. Simple fix, but if you think you have this problem chech it out right away. If the nut comes off, so does the attached wheel!!!

10-16-2009, 04:49 AM	#1
multiSS Drives: 69 SS396 chevelle 2010 2ssrs camaro Join Date: Oct 2009 Location: Alberta Posts: 71	Clicking sound from rear axle Since I purchased my 2SS-RS LS3 6S I have noticed some clicking sounds coming from rear axle area on acceleration and decceleration. Local gm dealer found that the axle hub to axle spline nut was loose. This was allowing the hub to turn slightly on the spline causing clicking noises. Simple fix, but if you think you have this problem chech it out right away. If the nut comes off, so does the attached wheel!!!