Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Is This A Good Price For Borla S-Type Axle Back & Magnaflow Tru-X 2.50" X-Pipe?

caverman · 01-19-2010, 04:12 PM

You can reuse the stock tips. I think there is about an inch or so of space between the back of the tip and the front of the actual muffler. Many have reused the tips already. So unless you specifically want after market tips then have the muffler shop cut off and reuse the factory tips. Locally I've found a shop to do the muffler for $80 and another for $96. Shop around and you'll find it in that range. The x-pipe will cost you about $95 and to install should be around $60-$80 for that.

Do a search on this forum for muffler delete. There are plenty of threads and almost everyone reuses their factory tips.

01-19-2010, 04:12 PM	#5
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	You can reuse the stock tips. I think there is about an inch or so of space between the back of the tip and the front of the actual muffler. Many have reused the tips already. So unless you specifically want after market tips then have the muffler shop cut off and reuse the factory tips. Locally I've found a shop to do the muffler for $80 and another for $96. Shop around and you'll find it in that range. The x-pipe will cost you about $95 and to install should be around $60-$80 for that. Do a search on this forum for muffler delete. There are plenty of threads and almost everyone reuses their factory tips. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal