Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - adding a eforce with stock bottom end and manifolds.

Stingr69 · 11-18-2011, 11:15 AM

I added an E-Force and a LS9 (ZR1) Cam and JRE tune with no other mods. Puts out over 400 ft-lbs at 2000 RPM

About 450 HP but we suspect the dyno was reading low and it was over 100°F and humid that day. Sounds completely stock at 550 RPM idle. 2nd gear can be used if you roll it out carefully. LOTS of torque.

-Mark.

11-18-2011, 11:15 AM	#6
Stingr69 '69 Owned Since '79 Drives: '69 Z/28 LeMans Blue w/White Join Date: Oct 2008 Location: LR AR Posts: 1,847 View My Garage	I added an E-Force and a LS9 (ZR1) Cam and JRE tune with no other mods. Puts out over 400 ft-lbs at 2000 RPM About 450 HP but we suspect the dyno was reading low and it was over 100°F and humid that day. Sounds completely stock at 550 RPM idle. 2nd gear can be used if you roll it out carefully. LOTS of torque. -Mark.