^ no matter what, the wiring bundle is not going to be accessible, as the enclosure is fiberglassed directly to the car, so none of this was a concern. in addition, the wiring bundle is loose and is not glassed, with the exception with the entrance and exit from the enclosure.
everything is working fine, so i know the wires didn't melt.
i admit, it's not very "repair" friendly, but nor is any part of this enclosure. if i had to do it again i would have protected it "just in case", but again... i didn't see it, nor has it become, a big issue.
Last edited by mattyjman; 04-25-2013 at 09:28 PM.
|