View Single Post
Old 03-27-2012, 10:34 AM   #17
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,574
Curious what would be the harm of going to 1.8 rockers with the mild OEM LS3 or LS9 cam ?? Seems to me going to a 1.8 rocker on a mild cam should show some improvement in the mid and upper rpm ranges without sacrificing low speed street manners. The LS7 comes stock with 1.8 rockers.
I see Scorpion Racing, Comp Cams and Yella Terra all make 1.8 rockers for the L92/LS3 engine ( offset intake rocker ).
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
flht99b is offline   Reply With Quote