View Single Post
Old 12-03-2008, 10:10 AM   #2
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,201
Are you rebuilding your engine or anything? I just wonder how it's going to take that 150-shot.

I think the catback will get you about 10 RWHP, depending on style of headers, another 10-20, CAI will get you about 10+15, heads (who knows? You don't provide any information), tune (again, it will depend on the match between your heads and cam), and nitrous will probably get you close to 400 - 450 FWHP. It's going to depend a lot on how well you match your components. FWIW, I'd try to go with a set that's matched to running nitrous too. You might think about what you're going to do with your clutch and 10-bolt too. Unless you just put a high-power clutch in there, you'll probably toast it and as soon as you start to hook, that 10-bolt is going to go boom. You could throw a girdle on the 10-bolt to help it out, but you really need to keep an eye on that thing. Manual cars are very hard on these and adding the shock spraying will add will only lessen the life of it.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote